Jeep Wrangler Fender Flare Replacement: How To Get The Best Deal

The position of a fender flare makes it difficult to repair. However, if the flares are damaged or a component is missing, it is necessary to replace the fenders.

Based on the Jeep model, replacing the fender flares may cost between $250 and $450.

Usually, a fender flare is composed of durable plastic. However, they are prone to cracking in the case of an accident or continuous usage.

You can replace the current fender flares from a Jeep by loosening their bolts and pulling them off. Swap as early as possible, which will help you drive safely on the road.

This article will explain all the details about the extra variables that may affect the replacement cost calculation. So, keep reading to know the estimated cost of the fender flares replacement.

Jeep Wrangler Fender Flare Replacement Cost

Before replacing Jeep Wrangler Fender Flares, you should have information and an estimated cost. To help you, we will discuss and simplify every aspect of the fender flare replacement process, including projected costs.

Based on the Jeep model, changing the fender flares might cost somewhere around $250 and $450.

However, this installation is easy and will take around 5 and 10 minutes per fender. If you apply these easy instructions, you’ll be able to replace them on your own. 

If you purchase a fender flare for automobile workshops or search online, you may find several options. Most fender flares are designed for specific jeep types and models and make years in a few circumstances.

We’ve gathered the top fender flares manufacturers with many buying tips to save your effort and time.

Model/Brand FeaturesEstimate Cost
Smity-bit 75489 Fender Flares4 fenders (Two pairs) included. Top-quality Steel.$250.50
GAE Fender Flares Fits all 2010 – 2017 Jeep Wrangler JK and JLs. Both 4-door and 2-door models.Smooth matte finish.$325.25
Hook Road Smooth Fender FlaresTwo pairs for the front and rear wheel. Designed for JL & JK 2010 to 2015 jeep models.$175.50
Molar Jeep Fender FlareFor 2015 and 2021 model jeeps.Set of four pieces$145.50
U-Drive Flat Steel Fender FlareThe kit has two pairs. Textured black coating.$165.50

When Should Jeep Wrangler Fender Flare Be Replaced?

Front Inner Fender Liners

Your Jeep could throw up stuff, pebbles, mud, and other objects while accelerating or driving on a muddy roadway. However, a fender flare is made of durable plastic, and it may break in the event of an accident or long usage.

Given the position of the fender flares, a repair will be difficult to hide. You can hire technicians too for professional blended work. 

There are several varieties of fender flares, from huge to low but noticeable.

Most flares are held in place by existing manufacturer bolts that do not need any removal or welding. As a result, are simpler to wash than other Jeep body parts.

Broken flares not only look terrible, but also they don’t provide safety as well. The absence of a fender flare increases the possibility of flying pebbles or other objects hitting another vehicle, which can cause an accident too. This tragic event may be avoided by purchasing a new fender flare at a minimal cost.

Ensure that you buy the correct fender flares for the Jeep.

Due to the variety of Jeep body styles, selecting the incorrect flares might delay the replacement process. So, choose the fenders wisely by checking the jeep model first. And then start replacing the fenders.

Replacement Procedures for Jeep Wrangler Fender Flares

Replacement Procedures for Jeep Wrangler Fender Flares

Jeep flares are unique extension attachments. Some attach directly to the fenders, while others need drilling.

They protect against rust, add an appearance, and in certain instances, fulfill the legal rules and regulations by sliding over the fenders slightly above the tires. 

Flares of different colors, shapes, and patterns may be added to give the Jeep a new appearance. So, make sure you choose the correct size.

This article will demonstrate how to add a fender flare on a Jeep.

Step 1: Placing a Fender Flare

  • Open any current car flares.
  • Buy custom-made fender flares for the Jeep.
  • Install the flare trim’s enduring parts.
  • Attach the fender flare upper screws.
  • Unplug from the fender’s backside plugs.
  • Loosen back wheel well-supporting column screws.

Step 2: Cutting Fender Flare Slots

  • Identify the bottom-line fender flare slot to make a position on the thermoplastic bumpers.
  • Mark the location where the framework hole meets a fender flare.
  • Cut holes on the edges of a fender flare that match the slots in the Jeep’s framework.

Step 3: Simply Attach the New Fender Flares

  • Install the specified screws to a fender flare connector.
  • The fender fasteners must be reinstalled with a wrench.
  • If rubber screws are supplied, attach them to the flare. But it’s better not to use it.

FAQ

How Much Does a Jeep Fender Replacement Cost? 

Replacing tiny fenders may cost between $450 and $1,200, including labor costs, as usual. This is a single-part replacement job that includes labor costs.

If repairing the fenders also involves restoring the front lights, grille, and headlights, the total cost might vary from around $2,000 to $3,500.

What Is the Price to Buy Aftermarket Flare Fenders?

The price of aftermarket tire fender flares may range from $100 to $500. The price is determined by numerous aspects, such as the product’s material, intended application, finishing, mounting parts, and set components.

In addition, based on the model, year, and make of the Jeep, labor costs may range between $400 and $850.

How Much Do Just the Jeep Fenders Cost?

Based on the Jeep type, buying the fender flares might cost between $350 and $500.

Are Fender Flares Cost-effective?

Basically, fender flares are an outstanding Jeep modification. They will also protect the Jeep and other vehicles on the street from dirt, pebbles, and other road hazards. The greatest aspect is that, in today’s market for automobile accessories, fender flares are accessible for every Jeep.

Can You Paint Fender Flares Using Spray Paint?

Absolutely, it’s possible. It is simple to paint the fender flares using spray paint, patience, and some work.

Before painting the flares with specific automobile paint, you must first analyze all alternatives. Then remove and prepare the flares for painting them.

Final Note

The primary function of a Fender is to prevent dust and dirt from being thrown into the wind by the wheel.

There are several varieties of fender flares. The rest of the flares do not need any drilling or cutting since they are held in place by pre-existing maker slots.

It’s a cheap and easy replacement to do. Unfortunately, most fender flares are made of plastic, making them prone to damage and cracks.

You can adjust and modify it to the preferences you’re comfortable with. But make sure you don’t drive without the fender flares. This will increase the chance of damaging other vehicles on the road.

Leave a Comment