Is Getting a New Jeep Wrangler Radio Expensive? Here’s the Replacement Cost:

Radios inside the Jeep Wrangler will keep you engaged. Every Jeep has a radio set up inside on the dashboard. It can assist you with GPS tracking, a back wheel facing camera, and a variety of other driving-related tasks.

When the radio doesn’t meet any one of your requirements, issues start to appear. If the radio in the Jeep begins to fail, you will need to fix or replace it. The average cost to replace a radio is $950 in addition to any further charges.

This article will try to explain all of the critical costs related to replacing the radio in a Jeep Wrangler. Also, all the factors you need to learn about the replacement procedure.

Jeep Wrangler Radio Replacement Cost

Jeep Wrangler Radio

Before deciding to replace the radio in the Jeep Wrangler, you must have a clear understanding of the expense involved. To buy a radio that will suit the Jeep Wrangler, you should first determine its model. 

However, some specific audio systems are only suitable with certain Jeep Wrangler model years, which may exceed the budget. The total cost of the update should range from $450 to $750. Although, you may expect to spend $75 per hour for experienced advice.

When Should the Radio in The Jeep Wrangler Be Replaced?

After five years of use, many individuals claim that their radio began to behave strangely. Some individuals claim that after 75,500 km, they encountered difficulties. In most situations, though, everything depends on how well you maintain the possessions. A variety of factors may impact the audio system in the Jeep. Here are a few instances:

Parts that Do Not Function

If essential parts of the stereo system are damaged, you will need to fix them.

The Audio Quality Has worsened

If you find that the radio in the Jeep Wrangler is creating an uncomfortable sound, it is better to replace it.

No Vibrations Are Coming from The Speakers

A problem in the audio system of a Jeep Wrangler is typically the cause of poor audio vibration. 

Audio Bandwidth Limitations

If the vehicle’s speaker is damaged, low and high frequencies may be missing or affected.

Instructions for Jeep Wrangler Radio Replacement

Jeep Wrangler Radio Replacement

Even a rookie can finish the project in much less than an hour if they have all the equipment in the package plus a few extras available around the home. If you’re skilled at repairing such problems, You will need only 25 minutes.

Since you have less amount of time, you should put in as much work as possible to select the best radio for the replacement. Dimensions, measurements, other significant data, and the device’s look must be considered.

Step 1: Change the Head Unit

To change the head unit, unscrew the lid in front of the radio and the screws underneath it. Loosen the shift plate from beneath the audio system and unplug it. On the rear of the buttons, a second screw should be removed.

Carefully remove the plate from beneath the tire support to provide the link between the screws on either side. Remove the six screws that attach the wire harness to the surface. After opening the plate that protects it, disconnect the connections at the head unit’s rear and remove it gently.

Step 2: Change the Front Speakers

To have access to the front speakers, detach the body panels, center console, and bottom dashboard panels. All of them are detachable. To get access to the glove compartment, pinch and pull the sides.

To replace the driver-side sound box, unscrew and detach the access panel. The speakers are secured by two small screws and one rear bolt. Before disconnecting the sound boxes, they should be pushed downwards.

Unplug the speakers and detach the four bolts from the front after lifting the sound boxes. Connect the new speakers by reversing the procedure.

Step 3: Replace the Tweeters.

After fixing the front loudspeakers, managing the other parts would be easy. The tweeters emerge from the dashboard housings. Remove and reinstall the small speakers. 

Step 4: Replace the Audio Panel Speakers

The rear audio speakers of the audio system are also replaceable. It requires just the removal of four screws. Be careful not to damage the speaker when loosening the final screw. Remove it then. Connect the speakers to the stereo system.

Step 5: Installing an Additional Amp

An external amplifier fulfills the audio system. If you have the stereo sound system, an amp is already installed beneath the dashboard on the side of the vehicle. Setting up a new speaker takes effort. Typically, amplifiers are installed in the trunk.

FAQ

What Is the Price of a Jeep Radio?

If the radio in the Jeep begins to fail, you will need to fix or replace it. The average cost to replace a radio is $950 in addition to any further charges.

How Can I Improve the Quality of The Radio in The Jeep Wrangler?

Installing a subwoofer to the Jeep Wrangler’s audio system may be the ideal initial step in improving the sound. Installing a speaker, housing, and amp intended to create bass eliminates the requirement for the tiny speakers to generate bass. The music may sound much better if a subwoofer is installed.

Why is the Radio in the Jeep Wrangler Not Working?

If voltage and grounding are fine, you need to have a new audio system, or the wire isn’t making a better connection. If not, test the plug for current. If there’s electricity present, the wire between the radio and the fuse is defective. If not, you would have to fix the damaged cable section.

Why Does the Radio Turn on Yet Produce No Sound? 

If the radio’s lights are on and it appears to operate, but there is no audio, check the connection. Speaker cables improperly grounded to metal causes the no-sound issues. Cabling for speakers cannot be connected together. There is no way for speakers to use the very same connection.

Why Isn’t the Display on the Vehicle Radio Working?

A faulty or broken fuse can make the jeep radio’s screen useless. This fuse is located directly between the power line and the display. If you install an additional audio system in place of the factory one, a faulty fuse may prevent the new radio from turning on.

Final Note

The Jeep Wrangler has numerous radio modification options, ranging from prototype units to new devices. This keeps the original dash appearance with correctly designed frames and carefully chosen screen resolution. In addition, radio replacement head units can be changed with no effort.

This article attempts to outline the estimated cost of replacing the radio system in the Jeep Wrangler. We believe reading this has been beneficial to you.

Read More Jeep Wrangler Related Articles:
1. How Much Does it Cost to do a Diesel Conversion in a Jeep Wrangler?
2. How Many Miles Can a Jeep Wrangler Last?
3. How Much Does It Cost To Install Power Windows In A Jeep Wrangler

Leave a Comment