A shattered or cracked side-view mirror on the Jeep Wrangler creates significant safety problems for the passengers. As early as one notices damage to a side window, they should make the decision to replace it.
Now one would question how much it costs to replace the side window of a Jeep Wrangler. An experienced technician or service shop may still do the task for $250 to $500. Also, $750 because the actual cost estimate varies greatly based on a number of key factors.
In this article, we’ll now present a detailed analysis of the price to replace the Side Window on a Jeep Wrangler. Along with other relevant info about the side window installation.
Jeep Wrangler Side Window Replacement Cost
Reportedly, the usual cost range for replacing the side windows on a Jeep Wrangler car is somewhere around $250 and $500. However, it may increase to $600 to $750.
The labor cost is also not fixed since it differs from one expert to another. As well as an auto shop to another. As per the number of renowned jeep repair forums, some clients have spent between $80 and $200. Others estimated that the average cost of labor is around $175 to $285. Aside from that, the cost of side window replacement components typically ranges from around $75 to $155 based on where you get them.
Whether you pick tinted, gorilla, or coated glass for the jeep’s window, the cost of the components will vary accordingly. Remember that if you buy premium-grade glass, the price will surely increase.
Note that the actual cost to repair the side windows on the Jeep Wrangler may vary greatly based on the jeep’s type, model, mirror design, and the extent of the damage.
The cost of the replacement will also differ depending on the particular replacement option or window glass type. Also, as the number of installation difficulties, and the regional labor cost for such services. This Jeep Wrangler side window replacement cost estimate doesn’t include taxes and other fees.
When Do You Replace the Side Window on Jeep Wrangler?
You must choose to replace the Jeep’s side window as early as you see any severe damage or fracture. Every Jeep Wrangler unit is fitted with a stock side window of sufficient strength and reliability to survive for a longer amount of time. Unless the jeep is often forced to excessive speeding in harsh weather.
Check the Jeep Wrangler’s side windows as soon as possible. If you detect a crack or hole, replace the windows before it smashes on the ground. Also, it could hurt any passengers as well.
In addition, if you find a major fracture or damage on the jeep’s glass, you should quickly replace it. However, much like other Jeep components and parts, these stock side windows might get cracked or broken with time.
Moreover, the side-view mirror is likely to be damaged in the event of an accident. Therefore, it would be prudent to have the jeep checked by a skilled auto repair or mechanic quickly after an accident.
Instructions for Installing Jeep Wrangler Side Windows
After detecting damage to the Jeep Wrangler’s side glass, repair it as soon as possible. Now would be the time to examine the tools required to complete this replacement project.
- Replacement side window panel
- Cover for the window’s protection
- Knife with a razor blade and a sharp blade
- A roll of sticky tape (5X3X12 inches)
- Lubricate pencils for measuring marks
- Cleanser including ammonia and three carpet fibers cloths
- Oils cleanser
- Sticking marker for glass preparation
- Primer sets for glass and pinch welding
Now, carefully adhere to the directions provided below:
Step 1: Before beginning the primary task, protect the glass contact area of the Jeep with a protective layer so that you don’t damage the paintwork.
Step 2: Using a razor knife, cut along the interior of the trim. Cut the outer border of the paneling and its top in sequence. Use a knife to cut the polyurethane around the side window of the automobile. Now it is simple to move the windows from the gap, so do it with care.
Step 3: With the window gone, cut the polyurethane of the window gap border to 3mm. Then, position the new side window in the gap’s center.
Step 4: Check that the replacement window’s dimensions fit exactly in the previous spot of the side window on the jeep. You may also use the lubricant pencils to create alignment markings on the glass to ensure that it fits properly.
Step 5: Once you’re certain of all the dimensions, gently remove the replacement glass. Then wipe the interior with an alcohol-based cleanser and a carpet fibers cloth. Then, use the Oils cleanser and a carpet fibers cloth to wipe the glass’s outside edge.
Step 6: Install molding all around the glass. Then apply a sticking enhancer around its edges. After some minutes, wipe the enhancer with a carpet fibers towel and let it dry completely. Repeat the process on the fresh glass. However, this time just uses the glass primer instead of wiping the liquid. Simply wait 3 minutes and allow it to dry thoroughly.
Step 7: Prepare the clear glass fence by applying pinching weld primer 20 mm wide around the whole glass fence. Then wait 3 minutes for it to dry completely. Next, place the polyurethane beads with a 12 mm diameter in the center of the glass surface.
Step 8: Lastly, set the replacement window in the lubricant-marked spot. Then verify that the alignments are excellent. Push the glass forward as quickly as possible on the Jeep’s windshield. After reinstalling the windows, open a window and liftgate to avoid pressure. Now apply the sticky tape to maintain its position while the polyurethane cures. When finished, remove the sticky tape. Then a water test to check that the windows are not cracked anymore.
Note: Repairing a Jeep Wrangler side window takes technical knowledge and skill. So, if you’re not confident, use professionals.
What Is the Average Time to Replace a Jeep Wrangler Side Window?
Even though the time required to replace the side window glass mainly differs from technician to technician. Based on their level of knowledge and skill, the full process may be completed within 1 and a half hours. After the replacements are completed, the technician must also wash up the area. Also, determine if any additional repairs are necessary.
What is The Price to Replace a Jeep Wrangler Passenger Window?
The cost of labor is projected to be around $85 and $125. While the cost of components is somewhere around $155 to $250. This budget doesn’t include fees and taxes. Also, it doesn’t take into account the exact model year or area. Similar adjustments may also be required. This range is determined by the quantity and average age of Jeep Wranglers on the street.
How Much Does Side Glass Replacement Cost?
Replacement costs of the side window are around $350. With typical costs ranging between $250 to $465 for side window installation in the United States in 2022.
Cracked, broken, or shattered side windows are the last thing anybody wants to deal with on a long journey. When driving on the highway make sure the jeep is in good condition. Therefore, as early as you detect the problem, hire the closest jeep service facility quickly. This article will also help you in learning more about the side window replacement job, cost, and procedure for a Jeep Wrangler.