I like to drive off-road. I do not like the dents and dings that are imposed on my rocker panels because of my driving experiences. I want the look of my vehicle and the value of my vehicle to stay high, so I choose to have rock sliders on my Jeep wrangler.
I know which rock sliders I like but I asked some of my paint and body specialist friends to recommend the best Jeep rock sliders to include in this article.
Why Do you Need Rock Sliders in Your Jeep?
If you drive over rough terrain that has a lot of rocks or possible stumps then you need rock sliders. For rough terrain driving you may also need good tires.
Rock sliders are intended to protect your vehicle from dents and damage when you travel over rocks or gravel, or when you run over stumps or large limbs. The rock slider stops these items from damaging the rocker panel.
Your rocker panel is the lowest section of your vehicle body and they are usually the first portion to be dented, or damaged during off-road travel.
You will also benefit from the rocker panel when you are getting in and out of the vehicle. This statement is especially true of vehicles that have been lifted or have greater clearance. The rock sliders are sturdy and make a convenient step to help you get in and out.
Some people say that you do not need rock sliders if you drive mild off-road surfaces. I say that the rock slider is so handy at preventing damage and protecting your investment that you need them if you drive any dirt roads or any areas that have no pavement. These items also protect your rocker panels from damages that can occur when gravel or debris from the highway is thrown up.
Top Jeep Rock Sliders Comparison
Our Top Pick
Our Top Pick
5 Jeep Rock Slider Reviews for Every Model
1. Tyger Auto Star Armor Kit
The fitment of these rock sliders is perfect on the Jeep Wrangler JK 4-door manufactured between 2007 and 2018. They fit perfectly to provide the maximum amount of wheel-to-wheel protection from rocks, gravel, and stumps.
The one-piece design of these sliders makes them stronger and more reliable than many of the two-piece designs. These items bolt on so you do not have to drill any holes or make any alterations to your Jeep for installation purposes. You will more than likely be able to install your sliders at home using a 10mm socket wrench and possibly a 13 mm socket wrench.
They are coated on the inside and out to protect them from rust and corrosion. They look awesome on your vehicle, and they reliably protect you from the dangers of the road.
2. Hooke Road Jeep Wrangler JK Rock Rails
Protect your vehicle body from dents and dings that can lead to rust and corrosion. These rails fit onto the Jeep Wrangler Unlimited JK 4-door manufactured between 2007 and 2018 perfectly. Sad to say they do not fit the Jeep Wrangler JL manufactured in 2018.
The design utilizes heavy tubing with stanchions between the tunes to strengthen them. Installation is a breeze because of the bolt-on design. Most Jeep owners put these sliders on at home in less than 45 minutes, using simple hand tools that they already have in their toolboxes.
The bolts that you need to install the sliders are already in existence on your Jeep. Read the instruction manual carefully and locate the required bolts in the specified placement area before you get started.
These rock sliders are very sturdy and they do protect your vehicle. They have a slightly aggressive appearance and a lot of Jeep owners like the way they make their vehicles look.
They are specifically made to fit a four-door vehicle and do not fit perfectly on the two-door vehicles.
3. Redrock 3-Inch Round Curved Side Step Bars
A step up into your vehicle is provided so you do not have to struggle to climb in and out of your off-road-ready Jeep. The top portion of the sliders has textured areas just beneath the doors that will allow you to step onto them and get a good grip. This eliminates many of the accidental slips and falls that happen when people step up on these devices to get into the vehicle.
An aesthetically appealing mirror finish allows this step/protection piece to add to the beauty of the vehicle. It is not a highly aggressive-looking step so it looks good no matter what your general purpose for using your Jeep is.
It provides great side protection so your rocker panels and doors remain unblemished by rock and road debris. It also installs in a short amount of time without you having to drill holes, mounting brackets, or make alterations to your vehicle. In less than 2 hours you will have this step installed on each side of the vehicle and be ready to go for a ride.
4. Barricade Off-Road Jeep JK Rock Sliders with Steps
Moderately difficult to install. You can probably have both of the steps installed in under two hours. You will not need to cut anything or drill anything during the installation process. You might need assistance in holding the slider in position while you tighten the bolts to make the connection.
The durability of this set of sliders is unquestionable. The steel tubing is strong and resilient and it is black powder-coated so it is not going to rust or succumb to damage from outdoor elements. Go ahead and get them wet, get them muddy, or drive in the heat of summer. These sliders will retain their beauty and integrity.
They do not just offer protection to your rocker panels. They offer protection to your undercarriage and to your doors. They even stop many pieces of debris that would be slung up to the windshield and cause possible cracks and breakage.
These are protective devices that create attractive steps that help you get in and out of the vehicle. They add a touch of class.
5. EAG Side Steps Armor Fit 2 Door Rock Sliders
Side steps that add a great look to your lifted vehicle. They give you a method of entering the vehicle without struggling. They can also be placed on factory-height vehicles and not just on the lifted ones.
These are black powder-coated steps that do not rust and do not corrode. They can be used on a primarily paved road-driven vehicle or on a vehicle that sees rough terrain in off-road travel.
The surface area is skid resistant. Your foot will not slip because the snow or water has covered your step. Your step is impervious to snow, sleet, rain, hail, and rough weather.
If you’re looking for affordable rock sliders you can choose/pick EAG side steps armor fit 2 door rock sliders.
Buying Guide For Jeep Rock Slider – Things You Need To Know
After reading all of about those great rock sliders you are probably convinced that you need to install some on your Jeep Wrangler. You are making an excellent choice, but slow down and learn how to choose the best sliders for the Jeep you own and the driving you do.
You want to check with the manufacturer to see if the slider you are looking at is designed to fit the Jeep make and model that you drive. If the fitment is proper your new steps will need no alterations and you will not need to make extensive changes to your jeep.
Ease of Installation
Go ahead and look for the easiest sliders you can find when it comes to installations. You want bolt-on devices that you can take off if you decide you want to. The bolt-on sliders also do not require you to drill any holes in the vehicle and they do not require mounting brackets.
All rock sliders are made of durable materials that are finished in such a way as to make them capable of being out in all sorts of weather. The finish is usually a personal preference. You might like the black powder look and you may want your sliders to be shiny like chrome.
Sliders may have round or square tubing used to create them. The square tubing is harder to bend and shape and the sliders are not usually as attractive as the ones made from the round tubing.
Let’s see a complete guide on how to install Jeep Wrangler rock sliders
FAQs For Jeep Wrangler Rock Sliders
What are Rock Sliders on a Jeep?
They are protective pieces that are put on the side of the vehicle to stop rocks and hard pieces of road debris from denting or damaging the rocker panel, door, or undercarriage of the vehicle. They also serve as a step that helps you climb into the cab of the vehicle.
How Thick Should Rock Sliders Be?
The tubing should be a minimum of 3/16” so they are strong enough to not bend or give under the pressures they will have to endure.
What is Kick Out on Rock Sliders?
The kick-out is a section of the slider at the rear close to where your rear tire is located. This portion of the slider is purposed to help push your vehicle out of the way of an obstacle like a stump that might damage it.
If you are looking for rock sliders that act as functioning steps to help you get in and out of the vehicle you can consider the Redrock 3” Curved Rock Sliders because we found this as the best jeep rock sliders. These sliders have textured areas that rest just beneath the doors of the vehicle. The textured area is solid and not just a rolled piece of tubing. It helps your footrest securely and eliminates accidental falls and mishaps.
If you are looking for a more open and tubular design rock slider look into the Hooke Road Jeep Wrangler JK. The stanchions on this tubular design lend more strength to it, but you do not have the solid look of a step.
Rock sliders are the best possible way for you to protect the money you have invested in your vehicle if you use it on rough terrain.
Best Seat Covers for Jeep Wrangler Review